Bit-Tree Creativity - 8-CH Wireless Remote Control RX Receiver Board (High-Current MOS Drive)

8-CH Wireless Remote Control RX Receiver Board (High-Current MOS Drive)(A061)

BIT-TREE 8-channel 2.4G wireless remote control RX receiver board adopting 2.4G wireless communication, built-in high-current MOSFET driver. It supports momentary and latch working modes. It can directly drive motors, lamps, solenoid valves and other equipment, and works independently without MCU. Suitable for remote control cars, models, DIY teaching and other scenarios.

Stable 2.4G Wireless Performance

8-Channel High-Current Drive

Adjustable Momentary / Latch Mode

BIT-TREE CREATIVITY

STEAM skills like programming will be a core competency for the next generation, and the time to cultivate this ability is now.

Parameter Category	Item	Specification Details
Basic Parameters	Module Model	8‑Channel Wireless Remote‑Control RX Receiver Board (High‑Current MOS Drive) (A061)
	PCB Overall Dimensions	75.00 mm × 45.00 mm
	Wireless Operating Frequency Band	2.4G ISM license‑free industrial band, strong anti‑interference capability
	Output Channels	8 independent output channels OUT1~OUT8
	Drive Device	Independent N‑channel MOSFET J122G for each channel, high‑power driving capability
	Load Capacity	Each channel sustains several‑ampere continuous current. Can directly drive DC motors, LED strips, electromagnetic relays and solenoid valves.
	Power Input	DC 7.4V~8.4V; dual power‑supply options: DC power jack and lithium‑battery holder.
	Control Mode	Toggle‑switch selects momentary / latching operating modes.
	On‑board Hardware	Pairing button PAIR, pairing indicator PAIR LED, power indicator PWR, lithium‑battery charging‑circuit interface
	Product Weight	44 g (with housing); 20 g (bare PCB)
Interface Definition	OUT1~OUT8	Power output terminals. Connect positive terminal of load to OUT, negative terminal of load to power GND.
	VCC/GND	Main power input for DC power supply or lithium‑battery connection.
	PAIR	Pairing button for binding with 2.4G remote‑control transmitter.
Key Features‑DIP‑Switch Mode Selection	Hardware DIP‑switch freely toggles output logic; no firmware modification required.
Key Features‑High‑Current MOS Direct‑Drive	Built‑in power MOSFETs; no extra driver expansion board needed, directly drives high‑power actuators.
Key Features‑8‑Channel Independent Isolated Control	8 channels operate without mutual interference, suitable for multi‑actuator robots, multi‑channel lamp banks and multi‑way actuators.
Key Features‑Dual‑Mode Description	Momentary: output ON while remote‑control button held; OFF upon release. Latching: one press turns ON; next press turns OFF.
Key Features‑Multi‑Remote‑Controller Pairing	Single receiver board can bind multiple remote transmitters; supports multi‑operator control and standby‑remote switching.
Key Features‑Lithium‑Battery Power & On‑board Charging	Supports 7.4V 2‑cell lithium‑battery power supply. Built‑in charge management; allows operation while charging.
Key Features‑Clear‑Pairing & Re‑bind Function	Long‑press pairing button to erase all bound remotes, then bind new transmitter handles.
Packaging Options	Available Packages	① Anti‑static bag soft package ② White‑card hanging‑hole gift box ③ Kraft paper box

Related Products